Caterpillar Skid Steer Weight 345-5147

Skid Steer Weight Global Aftermarket 345-5147

$118.00

75 pound Skid Steer weight.  Compare to OEM 345-5147

Out of stock

Not sure if this fits your equipment?
Please review the “Click for Fitment & OEM Reference +” tab and all other tabs below before ordering. Model listing alone does not guarantee fit. Verify product-specific fitment details before ordering.
Contact product support if you need help confirming fitment.

Skid Steer Weight for Caterpillar® Skid Steer Models.  Replaces 345-5147.

Compare to  Caterpillar® 345-5147

  • Skid Steer Weight, Global Sourcing
  • New Cast Iron
  • Will Stack  (Will stack to each other, will stack to OEM version)
  • Color:  Cat Yellow  Type:  Polyurethane Paint
  • Counterweight for Caterpillar® Applicable Skid Steers
  • ⚠ When Choosing and Installing Ballast Weights: ALWAYS refer to the recommendations contained in the owner’s manual for your equipment. ALWAYS refer to the maximum load rating of your tires.
  • ⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm.  See: www.P65Warnings.ca.gov

KL213-Y-01

GLOBAL SOURCING ICON

Fits the following Caterpillar Skid Loaders: Reference to OEM Version 345-5147

236D Caterpillar, 236D3 Caterpillar, 242D Caterpillar, 242D3 Caterpillar, 246D Caterpillar, 246D3 Caterpillar, 257D Caterpillar, 257D3 Caterpillar, 259D Caterpillar, 259D3 Caterpillar, 262C2 Caterpillar, 262D Caterpillar, 262D3 Caterpillar, 272D Caterpillar, 272D XHP Caterpillar, 272D2 Caterpillar, 272D2 XHP Caterpillar, 272D3 Caterpillar, 272D3 XE Caterpillar, 277D Caterpillar, 279D Caterpillar, 279D3 Caterpillar, 287D Caterpillar, 289D Caterpillar, 289D3 Caterpillar, 297D Caterpillar, 297D XHP Caterpillar, 297D2 Caterpillar, 297D2 XHP Caterpillar, 299D Caterpillar, 299D XHP Caterpillar, 299D2 Caterpillar, 299D2 XHP Caterpillar, 299D3 Caterpillar, 299D3 XE Caterpillar

We do not carry the mounting hardware for these weights.

Typical hardware depends on number of weights stacked but is often:
M12-1.75 x 80mm Hex Head Bolts and/or M12-1.75 x 130mm Hex Head Bolts
Note: M12 ID Flat Washers are usually required.

  • Ships Truck Freight Only.
  • Shipping cost will be calculated during checkout and depends on the total weight of the order.
  • See the Shipping FAQ for more information.

The Tractor Weight Store™

OEM Reference / Conditional Model Applications

OEM Reference: Caterpillar 345-5147

Important Fitment Notice: Model listing alone does not guarantee fit. Verify this accessory in your owner's manual.

Need help? Contact product support with your tractor model and any product-specific fitment questions.

Need help with fitment terms? Review fitment, conditional fitment, required measurements, and clearance. See the Tractor Weight & Ballast Glossary.

Conditional Model Applications

The models below are conditional applications. Model listing alone does not guarantee fit. Verify product-specific fitment details before ordering. Please see Understanding conditional fit.

Showing 35 model applications.
MakeModelSeriesFitment StatusVerify Before Ordering
Caterpillar236DConditional fitmounting method, bracket requirements, clearance
Caterpillar236D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar242DConditional fitmounting method, bracket requirements, clearance
Caterpillar242D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar246DConditional fitmounting method, bracket requirements, clearance
Caterpillar246D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar257DConditional fitmounting method, bracket requirements, clearance
Caterpillar257D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar259DConditional fitmounting method, bracket requirements, clearance
Caterpillar259D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar262C2Conditional fitmounting method, bracket requirements, clearance
Caterpillar262DConditional fitmounting method, bracket requirements, clearance
Caterpillar262D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar272DConditional fitmounting method, bracket requirements, clearance
Caterpillar272D XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar272D2Conditional fitmounting method, bracket requirements, clearance
Caterpillar272D2 XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar272D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar272D3 XEConditional fitmounting method, bracket requirements, clearance
Caterpillar277DConditional fitmounting method, bracket requirements, clearance
Caterpillar279DConditional fitmounting method, bracket requirements, clearance
Caterpillar279D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar287DConditional fitmounting method, bracket requirements, clearance
Caterpillar289DConditional fitmounting method, bracket requirements, clearance
Caterpillar289D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar297DConditional fitmounting method, bracket requirements, clearance
Caterpillar297D XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar297D2Conditional fitmounting method, bracket requirements, clearance
Caterpillar297D2 XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar299DConditional fitmounting method, bracket requirements, clearance
Caterpillar299D XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar299D2Conditional fitmounting method, bracket requirements, clearance
Caterpillar299D2 XHPConditional fitmounting method, bracket requirements, clearance
Caterpillar299D3Conditional fitmounting method, bracket requirements, clearance
Caterpillar299D3 XEConditional fitmounting method, bracket requirements, clearance

Scroll to Top