79018826 WL305-B TRACTOR WHEEL WEIGHT

Wheel Weight USA Aftermarket 101 Pound Version 79018827

$132.00

101 Pound Stacking Wheel Weight.  Compare to 79018827

Mounting Pattern: 3@8″ or 4@7 1/2″ to 8 1/2″

Availability: In stock

101 Pound Stacking Tractor Wheel Weight for Case, CaseIH, Cub Cadet and Others.

Compare to  Tayfyco® 8233 and others. Made in the USA!

  • Aftermarket Wheel Weight, Made in USA
  • New Cast Iron
  • Wheel weight for steel wheels
  • Will Stack to Each Other
  • Color: Gloss Black Type: Industrial Enamel
  • Outer Diameter is 16 5/8″
  • Inner Diameter is 7 1/2″
  • Thickness is 3 1/2″
  • Mounting REQUIRES 3@8″ or 4@7 1/2 to 8 1/2″ patterns in wheel.  See Requirements tab and Mounting Information tab.
  • Questions about fitment?  CONTACT PRODUCT SUPPORT.
  • ⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm.  See: www.P65Warnings.ca.gov

WT8233-B-01

Will fit the following models with correct wheel and mounting pattern.

Note: This weight is often used as front wheel weight in two wheel drive models.  Due to the OD of this wheel weight it is often better to choose the 61 pound version WL606-B-01

Questions about fitment?  CONTACT PRODUCT SUPPORT!

Case® CaseIH® Models: 3220 CaseIH, 3230 CaseIH, 385 CaseIH, 395 CaseIH, 4210 CaseIH, 4220 CaseIH, 4230 CaseIH, 4240 CaseIH, 485 CaseIH, 495 CaseIH, 585 CaseIH, 595 CaseIH, 685 CaseIH, 695 CaseIH, 785 CaseIH, 795 CaseIH, 885 CaseIH, 895 CaseIH, 995 CaseIH

Cub Cadet® Models: 7252 Cub-Cadet, 7254 Cub-Cadet, 7260 Cub-Cadet, 7265 Cub-Cadet, 7272 Cub-Cadet, 7273 Cub-Cadet, 7274 Cub-Cadet, 7275 Cub-Cadet, 7300 Cub-Cadet, 7305 Cub-Cadet, 7360 Cub-Cadet, 8354 Cub-Cadet, 8404 Cub-Cadet, 8454 Cub-Cadet

Massey Ferguson® Models: Older Massey Ferguson models with 4@ 8 1/2″ mounting patterns.

New Holland® Models: TC18 NH, TC21 NH, TC21DA NH, TC23DA NH, TC24D NH, TC24DA NH, TC25 NH, TC26DA NH, TC29 NH, TC29DA NH, TC31DA NH, TC33 NH, TC33DA NH, TC34DA NH, TC35A NH, TC40 NH, TC40A NH, TC45 NH, TC45A NH, TC48DA NH, TC55DA NH

Yanmar® Models: EX2900 Yanmar, EX3200 Yanmar

  • Mounting Pattern 3@8″
  • Mounting Pattern 4@ 7  1/2″ to 8 1/2″
  • See Mounting Information Tab
  • One of the Weight Mounting Patterns Must Match Wheel Mounting Pattern
  • Verify all dimensions of the weight and your wheel to determine that the weight will fit all the way down into the wheel.
  • ⚠ When Choosing and Installing Ballast Weights: ALWAYS refer to the recommendations contained in the owner’s manual for your equipment. ALWAYS refer to the maximum load rating of your tires.

   

  • Ships Truck Freight Only.
  • Shipping cost will be calculated during checkout and depends on the total weight of the order.
  • See the Shipping FAQ for more information.

The Tractor Weight Store™

You may also like…

Scroll to Top