WT511-Y TRACTOR WHEEL WEIGHT. HEAVY VERSION OF JOHN DEERE R213907.

Wheel Weight USA Aftermarket Heavier Version of R213907

$219.00

158 Pound Stacking Wheel Weight.  Heavier Version of  OEM R213907 and T19293

Mounting Pattern:  4@9 1/2″ or 4@11″ to 11 3/4″ or 4@ 11″ to 12 3/4″

26″ or Larger Wheels

Out of stock

Heavy Version!  Aftermarket Tractor Wheel Weight Replaces John Deere R213907 and T19293. Made in USA!

Compare to John Deere® R213907 Tractor Wheel Weight.

  • Aftermarket Wheel Weight, Made in USA
  • New Cast Iron
  • Will Stack
  • Color: OEM Yellow  Type: Industrial Enamel
  • Outer Diameter is 21″
  • Inner Diameter is 9 3/4″
  • Thickness is 5″
  • Mounting REQUIRES 4@9 1/2″ or 4@11″ to 11 3/4″ or 4@ 11″ to 12 3/4″ pattern in wheel.
  • REQUIRES 26″ OR LARGER WHEEL.  This weight has larger OD than the R213907 and equivalents.
  • ⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm.  See: www.P65Warnings.ca.gov

WT511-Y-01

  • Reference to John Deere®  R213907 and T19293 Wheel Weight

Used on the following John Deere® models:

Note: These models may also have a different mounting pattern and REQUIRE a different weight.  See Mounting Information Tab to verify your wheel.  Have a question about fitment?   CONTACT PRODUCT SUPPORT.

1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 300B, 301A, 302, 302A, 3033R, 3038R, 3039R, 3045R, 3046R, 3120, 3320, 3520, 3720, 401B, 401C, 401D, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R, 4105, 4120, 4320, 4510, 4520, 4610, 4710, 4720, 5036C, 5038D, 5039C, 5039D, 5041C, 5042C, 5045D, 5045E, 5050D, 5050E, 5055D, 5055E, 5060E, 5060EN, 5065E, 5065M, 5075E, 5075M, 5076E, 5076EF, 5076EL, 5076EN, 5080EN, 5082E, 5083E, 5083EN, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090EN, 5090M, 5090R, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5100R, 5101E, 5101EN, 5103, 5103E, 5103S, 5104, 5105, 5105M, 5115M, 5115ML, 5115R, 5125ML, 5125R, 5200, 5203, 5204, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5415, 5415H, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5503, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5610, 5615, 5625, 5715, 5715HC, 5725N, 6110, 6120L, 6200, 6210, 6220L, 6300, 6310, 6400, 6405, 6410, 6500, 6605, 990, JD300-Series, JD301, JD400-Series, JD401

  • Mounting Pattern 4@9 1/2″
  • Mounting Pattern 4@11″ to 11 3/4″
  • Mounting Pattern 4@11″ to 12 3/4″
  • 26″ and larger wheels required
  • See Mounting Information Tab
  • Weight Mounting Pattern Must Match Wheel Mounting Pattern
  • Generally uses grade 5 carriage bolts to mount.  Weight mounting holes in wheel are generally square holes to accept carriage bolts.   5/8″ (16mm) carriage bolts to mount to wheel.  3/4″ (20mm) carriage bolts to stack.
  • Three weights per wheel is usually considered maximum with two weights per wheel being most common.
  • Fitment Questions?  CONTACT PRODUCT SUPPORT.
  • ⚠ When Choosing and Installing Ballast Weights: ALWAYS refer to the recommendations contained in the owner’s manual for your equipment. ALWAYS refer to the maximum load rating of your tires.

 

Mounting Pattern in Wheel MUST MATCH at least one mounting pattern in wheel weight.

       

  • Ships Truck Freight Only.
  • Shipping cost will be calculated during checkout and depends on the total weight of the order.
  • See the Shipping FAQ for more information.

The Tractor Weight Store™

Scroll to Top